Aluminium profile mat with vinyl rubber insert and one ramp profile: installed directly on the floor, without a mat well and without building work.
In an existing building, the mat well is usually the real obstacle: the screed is in place, the floor covering has been laid, and creating a recess would mean breaking open the floor. This version avoids that entirely – the mat is laid directly on the existing substrate, and the ramp profile forms the ramp edge on the access side, bridging the height difference of an overall height of only 17 mm. As a result, the transition remains comfortable, accessible on foot and suitable for wheeled traffic – including for wheelchairs, shopping trolleys or wheeled suitcases. The vinyl rubber insert stops coarse dirt right at the entrance and does not absorb moisture, but drains it away.
The single-sided version is chosen when the mat is walked on or driven over from one direction only – for example directly in front of a door or adjoining a wall. If the area is approached from both sides, the double-sided version is the right choice; technically the two are identical and differ only in the number of ramp profiles. As nothing is installed into the floor, the system can also be used in rented premises and removed again when required, without any intervention in the floor construction.
This profile height is designed for entrance areas with low footfall: up to 50 people per day, recommended area 4–6 m² as a single zone. Typical buildings are family homes as well as small offices and medical practices. The rubber insert is approved for Zone 1, 2 and 3 and can also be used with permanent exposure to the weather; use as Zone 2 in the transition area is recommended.
The version with a ramp profile is the right solution wherever there is no mat well or none can be created: in existing buildings, in rented premises and in renovations without intervention in the floor construction. Not suitable for forklift trucks and construction hoists.
The mat is laid directly on the existing substrate, without a mat well. Depending on the location and the condition of the substrate, it is fixed with special construction adhesive or with expansion plugs – for secure fixing without slipping. The ramp profile is fitted in the front-to-back direction of the mat, i.e. on the end face of the first or the last support profile; in this version, on one side. The profile height of the ramp profile is based on the profile height of the mat (11 mm), not on the overall height. When fixing with expansion plugs or screws, check the route of any underfloor heating beforehand; use over underfloor heating is generally possible.
| Properties "Aluminium profile mat with rubber insert 11/30 mm - ramp profile on one side" | |
|---|---|
| Application | Indoor and outdoor areas – Zone 1, 2 and 3, recommended as Zone 2 (transition area) |
| Cleaning insert | Vinyl rubber |
| Footfall | up to 50 people per day |
| Profile heights | 11 mm |
| Overall heights | 17 mm |
| Profile width | 30 mm |
| Profile spacing | 4–8 mm (spacer sleeves) |
| Support profile | Double-supported rectangular hollow aluminium profile with internal reinforcing webs |
| Weight per m2 | Mat 15 kg/m² |
| Profile colour | Natural aluminium, black anodised or powder-coated; ramp profile natural aluminium |
| Connection | Stainless steel wire rope connection Ø 2 mm / minimum breaking load 3.43 kN; Fastening: chrome-plated brass screw clamp / DIN EN ISO 9001:2015 |
| Also suitable for | Wheelchairs, shopping trolleys and wheeled suitcases (accessible transition); existing buildings, rented premises and renovations without intervention in the floor construction; entrance areas with underfloor heating; permanent exposure to the weather; family homes, small offices and medical practices; not suitable for forklift trucks and construction hoists |
| Installation | Laid without a mat well directly on the substrate; fixed with construction adhesive or expansion plugs depending on the substrate; one ramp profile on the end face of the first or last support profile; height of the ramp profile according to the profile height of the mat (11 mm) |
| Can be combined with | GUMMI/BÜRSTE 11/30 1:1 – 20 mm, R11; RIPS/GUMMI 11/30 1:1 – 18 mm, R10; RIPS/GUMMI/BÜRSTE 11/30 1:1:1 – 20 mm, R11 (variants with rib carpet for indoor or covered outdoor areas only) |
| Properties | Slip resistance R10 (DIN 51130), reaction to fire class Bfl-s1 (DIN EN 13501), dynamic load capacity 2000 kg/dm², EPDM impact sound insulation 1.5 mm, material properties PVC 80° Sh A L93, tensile strength 21 MPa (PN EN ISO 37), use class Domestic 23 (EN ISO 10874), light fastness ≥ 5 (ISO 105-B02); lowest-profile design in the profile range, suitable for wheeled traffic, retains its shape, sound-insulating, dimensionally stable, can be rolled up, easy to clean, weather-resistant |
| Warranty | 8 years on the aluminium construction / 2 years on rubber products |
| Accessories | Aluminium ramp profile (height 11 mm, wall thickness 3 mm), replaceable vinyl rubber insert, Laser Cut Design, alternative version with ramp profiles on both sides |