Aluminium profile mat with brush insert and one ramp profile: installation directly on the floor, without a mat well and without construction work.
In an existing building, the mat well is usually the real obstacle: the screed is in place, the floor covering has been laid, and creating a recess would mean breaking up the floor. This version avoids that completely – the mat is laid directly on the existing substrate, and the ramp profile forms the ramp edge on the access side and bridges the height difference of the 20 mm overall height. As a result, the transition remains comfortable and accessible on foot and on wheels – including for wheelchairs, shopping trolleys or wheeled suitcases. The cassette brush mechanically removes coarse dirt, mud, snow and leaves from footwear.
The version with a ramp profile on one side is chosen when the mat is accessed on foot or on wheels from one direction only – for example directly in front of a door or adjoining a wall. If the area is approached from both sides, the version with ramp profiles on both sides is the right choice; technically, both are identical and differ only in the number of ramp profiles. As the mat is not installed into the floor, the system can also be used in rented premises and removed again when required without any intervention in the floor construction.
This profile height is designed for entrance areas with low footfall: up to 50 people per day, recommended area 4–6 m² as a single row of zones. Typical buildings are family homes as well as small offices and practices. The brush insert is approved for Zone 1, 2 and 3 and is used as the first cleaning zone both indoors and outdoors.
The version with a ramp profile is the right solution wherever there is no mat well or one cannot be created: in existing buildings, in rented premises and in renovations without intervention in the floor construction. Not suitable for forklift trucks and construction hoists.
The mat is laid directly on the existing substrate without a mat well. Depending on the location and the nature of the substrate, it is fixed with special construction adhesive or with expansion plugs – for secure fixing without slipping. The ramp profile is fitted in the front-to-back direction of the mat, i.e. on the outer face of the first or last support profile; in this version, on one side. The height of the ramp profile depends on the profile height of the mat (11 mm), not on the overall height. When fixing with expansion plugs or screws, check the layout of any underfloor heating in advance; installation over underfloor heating is generally possible.
| Properties "Aluminium profile mat with brush insert 11/30 mm - ramp profile on one side" | |
|---|---|
| Application | Indoor and outdoor areas – Zone 1, 2 and 3, recommended as Zone 1 (mechanical pre-cleaning) |
| Dirt-trapping insert | cassette brush |
| Footfall | up to 50 people per day |
| Profile heights | 11 mm |
| Overall heights | 20 mm |
| Profile width | 30 mm |
| Profile spacings | 4–8 mm (spacer sleeves) |
| Support profile | Double-supported rectangular hollow aluminium profile with internal reinforcing ribs |
| Weight per m2 | Mat 14 kg/m² |
| Profile colour | Natural aluminium, black anodised or powder-coated; ramp profile natural aluminium |
| Connection | Stainless steel wire rope connection Ø 2 mm / minimum breaking load 3.43 kN; fastening: screw clamp, chrome-plated brass / DIN EN ISO 9001:2015 |
| Also suitable for | Wheelchairs, shopping trolleys and wheeled suitcases (accessible transition); existing buildings, rented premises and renovations without intervention in the floor construction; entrance areas with underfloor heating; family homes, small offices and practices; not suitable for forklift trucks and construction hoists |
| Installation | Laid directly on the substrate without a mat well; fixed with construction adhesive or expansion plugs depending on the substrate; one ramp profile on the outer face of the first or last support profile; ramp profile height according to the profile height of the mat (11 mm) |
| Can be combined with | GUMMI/BÜRSTE 11/30 1:1 – 20 mm, R11; RIPS/BÜRSTE 11/30 1:1 – 20 mm, R12; RIPS/GUMMI/BÜRSTE 11/30 1:1:1 – 20 mm, R11 (variants with rib carpet for indoor areas or covered outdoor areas only) |
| Properties | Slip resistance R13 (DIN 51130), reaction to fire class Bfl-s1 (DIN EN 13501), dynamic load capacity 2000 kg/dm², EPDM impact sound insulation 1.5 mm, material composition Moplen EP440G, production standard ISO 2424, use class Domestic 23 (EN ISO 10874), light fastness ≥ 5 (ISO 105-B02); low installation height, sound-insulating, dimensionally stable, can be rolled up, easy to clean, weather-resistant |
| Warranty | 8 years on the aluminium construction / 2 years on rubber products |
| Accessories | Ramp profile in aluminium (height 11 mm, wall thickness 3 mm), replaceable cassette brush, Laser Cut Design, alternative version with ramp profiles on both sides |
